Home
Products
Wet Scrubber Tower for Air Pollution Control

Wet Scrubber Tower for Air Pollution Control

The wet scrubber also called spray tower, purification tower, spray column. It is a new type of industrial waste gas treatment and processing equipment.

Send Inquiry

Application

All kinds of harmful gases such as: H2S, S0X, N0X,HC1,NH3,C12 gas treatment Deodorizer for refuse transfer station or sewage treatment plant Process exhaust treatment for semiconductor photoelectricity industry Incinerators and industrial furnaces etc Sulfuric acid, hydrochloric acid, nitrogen oxide, hydrogen sulfide, hydrofluoric acid and other gas treatment

Working Princple

The principle is that the spray liquid and exhaust gas contact at the same time using the packing layer to change the flow direction and flow rate, so as to increase the contact surface, the acid and alkali exhaust gas neutralization absorption.

The exhaust gas is introduced into the purification tower (wet scrubber tower) by the wind pipe. Through the packing layer, the exhaust gas and the absorption liquid are fully exposed to the absorption and neutralization reaction of the gas-liquid two phase. After the exhaust gas is purified, the fan is discharged into the atmosphere by the dehydration of the mist removal plate and the mist eliminator. The absorption liquid is pressurized by the pump at the bottom of the tower and then sprayed down at the top of the tower. Finally, it is recycled to the bottom of the tower for recycling. The purified acid mist exhaust gas is lower than the national emission standard.

This type of scrubber tower can also absorb solvents such as Alcohol and gases such as Ammonia. Almost any water soluble chemical can be removed from the gas using a wet scrubber tower. Wet scrubber tower can also be used to remove trace quantities such as removing odors including Hydrogen Sulfide.

Features

Product special atomizing nozzle will at atomize liquid, gas-liquid exchange area is large, high cleaning rate;
Thickening treatment, external pressure strength;
Special water pump, simple structure and easy to operate;
Fast heating speed, good uniform use effect when heated;
Selection of excellent material, chemical anti-corrosion, long service life;

Model

According to waste gas type and temperature, we can use PP(Polypropylene)FRP(Glass fiber reinforced plastic), mild steel, stainless steel as the wet scrubber’s body, The materials of the corresponding internal accessories will also change. For example, there are four kinds of grid plates: PP, FRP, carbon steel and stainless steel, and high surface area materials include PP, ceramic rings, and stainless steel Raschig rings. The nozzles are available in stainless steel, PTFE (polytetrafluoro-ethylene) and titanium alloy materials. There are many different types of packing. BIOETP Environmental will design based on the specific application and can use virtually any supplier for this packing material. The material of construction is either metal or plastic depending on the temperatures and gases to be absorbed.

Odor Control Biofilter Selection Guide: 5 Technical Factors for Industrial Deodorization

2025年5月5日

Related Tags

scrubber tower wet scrubber wet scrubber tower

Related Products

Adsorption-Concentration Catalytic Oxidation System

The BIO Series VOC treatment system combines adsorption + desorption + catalytic oxidation system to destroy 98% of benzene, esters,

Pharmaceutical VOC Adsorber with GMP-Compliant

The BIO Series GMP Adsorption System is engineered for Pharmaceutical VOC Adsorber, featuring "medical-grade carbon+hot N₂ regeneration" to achieve 99.5%

Activated Carbon Adsorption System For Laboratory

The BIO Series Lab Adsorber (Activated Carbon Adsorption) is designed for research facilities, featuring "high-iodine carbon+HEPA" technology to remove 99%